Categories FAQ

Often asked: How to program rain bird esp 6tm?

How do you set a schedule on Rainbird?

Scheduling a Rain Bird WiFi Controller for Automatic Irrigation Tap the pencil icons on the respective programs or zones to edit your controller’s irrigation schedules. You can set the watering frequency, the start times, and the zone run times.

How do I reset my Rainbird ESP controller?

Resetting a Rain Bird ESP -Me is easy. To reset the irrigation controller, all you need to do is turn the dial to ‘Seasonal Adjust’ then hold the left and right buttons down until the LCD display says ‘CLEARED’ then your ESP -Me irrigation controller has been reset.

How do I reset my Rain Bird controller?

How can I clear all the programming and reset my Rain Bird ESP-Me sprinkler timer back to the factory default settings? Turn the dial to Seasonal Adjust. Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word “CLEARED” on the screen. Turn the dial back to AUTO RUN.

What is the master valve on a sprinkler system?

A master valve is an electric valve installed at the supply point which controls water flow into the main piping system. A master valve will greatly reduce any water loss due to a leaky station valve because the leaky station valve can only leak while the master valve is providing pressure to the system.

You might be interested:  FAQ: What is a bird of prey?

What is a Rain Bird irrigation system?

The first professional grade Rain Bird sprinkler system designed for homeowner installation, it provides everything you need to keep your lawn green season after season while saving water. Simple adjustments for spray rotation and distance help you keep the water on your lawn and off the house, sidewalk and driveway.

How do I reset my irrigation system?

How to Reset a Sprinkler System Turn the control dial to the “off” position. Press the “next” button to access the clear-memory feature. Press and hold the “off” button until the display stops blinking. Turn the control dial to the “run” position. Press and hold down the “minus” arrow and “prog” buttons simultaneously.

How do you clear the alarm on Rainbird ESP?

In the Auto dial position select Alarm and Clear. Manually start the problem station. If the short is in the field (wiring or solenoid) the station will operate without posting a new alarm.

Why does my Rain Bird Sprinkler System run twice?

A common reason why a program is repeating is that you have a second start time set. The start times control the exact time your ESP-Me timer will begin to water and they also control how many times a day your timer will water. The ESP-Me allows you to set up to 6 start times per program.

Why is my Rainbird not working?

Check that the wires are secure on the timer, and check the wiring in your valve box. If the wiring is fine in both places, then you may have a break in the wires in between. If that is not the issue, check to make sure your backflow device or all water supply valves are open.

You might be interested:  Quick Answer: How to say bird in french?

Why does my irrigation system finish watering and then start again?

If a station does not have a run time set, it will be skipped, and the next consecutive station with a run time in the program will start watering. Set up your watering schedule — the specific day or days the program runs.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *